Philips Universal Remote Codes & How to Program

Your Philips regular far-flung can be programmed to manage the most important manufacturer TVs, cable packing containers, and satellite tv for pc packing containers through the use of the code for that unique brand. If you have misplaced the code listing for your Philips standard remote, you can nevertheless software the far off with the aid of making an attempt at the codes right here or checking the Philips website.


Check alsoPhilips Soundbar Universal Remote Codes

Philips Universal Remote Codes

philips universal remote codes list

[table id=15 /]

GE & One-For-All Universal Remote Codes For Philips

  • 0062, 0204, 0184, 0208, 0205, 0206, 0207, 0004, 0189, 0183, 0199, 0200, 0288, 0456, 0003, 0008, 0068, 0075, 0086, 0087, 0141

Magnavox Universal Remote Codes For Philips

  • 0005, 0006, 0007, 0008, 0009

RCA Universal Remote Codes For Philips

  • 1003, 1004, 1008, 1012, 1019, 1062, 1068, 1069, 1075, 1086, 1087, 1088, 1130, 1132, 1134, 1167, 1183, 1196, 1219, 1235, 1268, 1273, 1291, 1292, 1370, 1377, 1382, 1386, 1390, 1407, 1426, 1434

Philips Universal Remote Programming Instructions

  • Turn on the machine (TV, DVR, etc.) you want to operate.
  • Press and keep the SETUP button till the purple mild indicator stays lit, then launch the SETUP button.
  • Press and launch the favored mode button (TV, DVR, etc.). The purple mild indicator flashes then stay lit.
  • Enter one of the four-digit codes from the coding desk below
  • With the system became on, press countless buttons to take a look at if the Device responds. If the gadget responds properly, you have efficaciously observed a legitimate code for your device.
  • Repeat steps 1 to four for different gadgets you want to set up the Remote manage for.

Another Way

After getting into the code, press the “Power” button on your faraway to flip off your HDTV. If it works, then the faraway has effectively been programmed. If it does not work, repeat the technique by using urgent and preserving the “Setup” button and then urgent “TV.” Enter a specific code. Keep attempting codes till one works for your particular TV.

Check also: Philips Soundbar Universal Remote Codes


Q1. Do Philips Universal Remotes Work?

ANS. If you’ve read this far, you already know the answer to this question is yes! You can use this remote control to control your DVD players, Blu-ray players, and sound system in addition to Philips TVs.

Q2. How do you program a Learn button on a Philips universal remote?

ANS. On the Philips Magnavox remote, look for the “SETUP” button. Hold down this button until the purple mild indicator remains lit. Press the device-specific button, such as “TV” for TV instructions or “DVD” for these codes. On the generic remote, press the “LEARN” button.

Q3. How do you use a Philips universal remote that lacks a setup button?

ANS. If your remote does not have a setup button, press and hold the gadget button for the machine you want to program. When the crimson mild on the remote blinks, release the button. The flashing light indicates that the remote is in programming mode for the system button you chose.

Q4. Why is my Philips TV not detecting my WiFi?

ANS. If you are unable to connect to any device, you should troubleshoot the Wi-Fi network. On the Vizio remote, press the Menu button, then select Network > Manual Setup > DHCP. If DHCP is turned off, press the appropriate arrow to enable it. If it is set to ON, press the appropriate arrow once to turn it off and once more to turn it on.

Q5. How do I program a universal remote control to my television?

ANS. Turn on your television or another device that you want to control. Press and hold the DEVICE and POWER buttons on the remote simultaneously. Wait until the power button illuminates before releasing both buttons.

Q6. Why isn’t my television responding to my remote?

ANS. Low batteries are usually the cause of remote control that does not respond to or control your television. Make sure the remote is pointing at the TV. Other electronics, certain types of lighting, or something blocking the TV remote sensor could also be interfering with the signal.

Q7. Why is my smart TV remote inoperable?

ANS. There could be several reasons why your remote isn’t working. Physical damage, battery issues, pairing issues, or problems with the infrared sensor on the remote or TV are the most common.

Q8. How do you set up a Philips television?


  • To access the main menu, press the menu button on the remote control.
  • Select SETUP with the cursor up/down and press OK.
  • Select Auto program by moving the cursor up and down and pressing OK. 

Q9. Why isn’t my Philips universal remote functioning properly?

ANS. Reboot the Philips television and remote control. Begin by restarting your remote control electrically by doing the following: Remove the Philips remote control’s batteries. On the latter, press several buttons. Replace the remote control’s batteries.

Q10. How do I program a universal remote control to my television?

ANS. Turn on your television or another device that you want to control. Press and hold the DEVICE and POWER buttons on the remote simultaneously. Wait until the power button illuminates before releasing both buttons. While pointing the remote at the TV or another device, press and hold the Power button for 2 seconds.

Q11. How do I re-program my Philips remote?


  • Set the remote to “Erase mode.” The default starting condition is ‘TV’ mode. For 5 seconds, press the ‘OK’ and ‘MUTE’ keys simultaneously.
  • Select the mode to be deleted. You can delete a mode by selecting it with the SELECT button Confirmation.

Q12. Where can I get my TV code?


  • On your Smart TV or streaming device, launch the YouTube app.
  • Navigate to the Settings menu.
  • Scroll down to the Link with the TV code section. Your TV will display a blue TV code.
  • Prepare your phone or tablet and follow the steps in the “Enter the code” section below.

Add a Comment

Your email address will not be published. Required fields are marked *